Main revision contents as follows:
1)Update of 2.1 Lambda 3S/3L Series Controller according to thelatest software;
2)Update of 2.2 Lambda 4S/5S Series Controller according to thelatest software;
3)Update of 3.1.2 Driver Update;
4)Update of 3.2.1 Software Setup;5)Other revisions
上海维宏电子科技股份有限公司Weihong Electronic Technology Co., Ltd.CAUTIONBoth PM85A and PM95A have two indicator lamps—+3.3V_OK(D2) and SYS_OK (D1). The latter one is thesystem indicator lamp. See Section 1.5 for details. The former one is the power indicator lamp, on after the card iscorrectly inserted into the PC slot and the PC is started.1.3 Lambda 3S/3L Series ControllerIndependently developed by Weihong Electronic Technology Co., Ltd., Lambda 3S/3L seriescontroller, used together with PM85A/95A communication card, is mainly applied to controlling routers,engraving and milling machines, drilling machines and cutting machines, available of comprehensivefunctions and convenient to use. Generally, Lambda 3S/3L controller is used together with steppingmotor drivers.The only difference between Lambda 3L and Lambda 3S is that Lambda 3S has a MPG interface.That is to say, Lambda 3L does not have a MPG interface. Their other functions are the same.Lambda 3S/3L series controller includes the following features:Enclosed controller, oil-proof, dust-proof, and water-proof;Serial communication, high speed 485 interface, baud rate 10Mbps;Max. pulse output frequency: 1MHz;Fewer cables and easier wiring
On-line update of hardware, dismounting avoided;Hardware adaptable, software customizable;Hardware encryption and software encryption for safety concerns;Input polarity adjustable, inputs active high/ low.See Fig. 1-5 for the dimensional drawing of Lambda 3S. The dimension of Lambda 3L is the sameas that of Lambda 3S.1.4 Lambda 4S/5S Series ControllerFully enclosed, Lambda 4S/5S controller not only has better protection, but also improvesappearance and quality. With a brand new hardware design scheme for the control board in thecontroller, Lambda 4S/5S is designed in an integrated way, extensively applied in engraving & milling,waterjet cutting, glass cutting and other industries.Lambda 5S can support motion control of up to 5 axes, while Lambda 4S up to 4 axes.Lambda 4S/5S series controller includes the following features:Enclosed controller, oil-proof, dust-proof, and water-proof;Input polarity adjustable, inputs active high/ low;Cascaded connection available for the extended terminal board;Serial communication, high speed 485 interface, baud rate 10Mbps;Max. pulse output frequency: 1MHz
